04-24-2008 03:43 AM
04-25-2008 12:28 PM
Hi kadikoy,
You cannot use the PFI lines as Digital Output in the E series boards. In this knowledge base you can find more information on how you can configure the PFI lines for your PCI-6024E card. Do you have another connector block? If you need to access the digital lines in this card one option would be to use another connector block, like the BNC-2110 or BNC-2115. Those will give you access to the digital lines of the card. I hope this is helpful,
04-25-2008 09:04 PM
Thanks alot. we have just bought our BNC-2111 connector block. Only one time we tested it. can we change it to BNC 2110?
Do you have any information about this subject.?
Reagrds.
05-07-2008 08:01 AM
Hi kadikoy,
I suggest that you contact our customer service representative about your options with this device; you can do so by calling at 1-866-ASK-MYNI (1-866-275-6964).
Regards,