05-09-2019 05:11 AM
Hello,
The Full DaqMX 19.0 SDK is available
http://www.ni.com/fr-fr/support/downloads/drivers/download.ni-daqmx.html#301173
But why is the "run time only" not available for download ?
05-14-2019 11:05 AM
He's on the way.
you can still work with runtime 18
05-14-2019 11:07 AM
Ok, I in that case I just find it surprising that SDK and client run time are not released together.
By curiosity, can you explain why ?
05-14-2019 11:09 AM
Sorry I'm not from the R&D so I don't have more information.
07-05-2019 03:48 AM
DAQmx 19.1 is out, but still no download options for the runtime or runtime with config support options. Are these still on the way?
Also is it possible to install older DAQmx runtimes (not full installs) with NIPM? I can't seem to find an option anywhere.
07-05-2019 03:50 AM
Same question, the runtime is really needed to deploy to client machines !
07-07-2019 08:05 PM
It seems the solution is to select the full DAQmx driver in NIPM, begin installing it, then deselect everything from the additional package list to install only the DAQmx runtime (how intuitive). It still wants to install the NI-DAQmx package (plus a whole heap of others) in addition to NI-DAQmx Runtime, so I'm not convinced it's the runtime only.
The offline runtime installer solution is basically 'build your own'.
https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z00000159txSAA&l=en-US
07-08-2019 06:40 AM
This is still not acceptable since client machines might not be connected to the network.
07-08-2019 07:52 AM
And of course, copying a ~3.5GB offline installer on each client machine is kind of less handy than the ~250MB run-time setup.
09-30-2019 03:11 AM
RunTime 19.5 is out, still no run-time deployment since 19.0