Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

Creating a waveform on a USB-6009 under Signal Express

Hi,

 

I am trying to generate a sine wave on USB-6009 running on SignalExpress LE.

 

No problem generating DC but as soon as I add a create waveform step there are errors. I can see that generate waveform step is trying to output the correct signal from its display.

 

Does anyone have a simple example on how to do this. Or is SignalExpress LE and the 6009 not capable of this function?

 

regards

 

Dave 

0 Kudos
Message 1 of 2
(3,168 Views)
As you can read from the specs, the 6009 is simply not capable of generating a waveform since it is software timed. This has been discussed numerous times. You can only write one point at a time in a loop. I have no idea if SignalExpress can do this. Post your problem to that board. If it can be done, it will be at a low frequency with considerable jitter.
0 Kudos
Message 2 of 2
(3,158 Views)