Accessing all 4 Analog Outputs on PCIe-6323 using a single terminal block?

[bemarcen]

Hello NI Community,

I am designing a hardware setup using an NI PCIe-6323 for an auditory research experiment. My application requires 4 Analog Outputs (AO 0 through AO 3) for multi-channel acoustic stimulation and 2 Analog Inputs (AI 0, AI 1) for recording microphone signals.

According to the PCIe-6323 pinout diagram:

• Connector 0 carries AO 0, AO 1, AI 0, and AI 1.

• Connector 1 carries AO 2 and AO 3.

Since the analog outputs are split between both 68-pin VHDCI connectors, connecting a standard terminal block (such as a single BNC-2110 or SCB-68A) to Connector 0 only grants access to AO 0 and AO 1.

Is there any NI accessory, splitter/Y-cable, or recommended routing solution that allows accessing signals from both Connector 0 and Connector 1 into a single terminal block, avoiding the need to purchase two separate terminal blocks?

Thank you in advance for your help!

[santo_13 · Accepted solution]

No, there isn't such an accessory.

You can create a custom breakout board with two connectors and you need to wire both connector 0 and 1 to the board.