Multifunction DAQ

Showing results for 
Search instead for 
Did you mean: 

AMUX-64 OPC support

We have LabVIEW 5.1 and BridgeVIEW 2.0. We have a laboratory system
using an AMUX-64 card. We would like to use OPC using the NIDAQ OPC
server but the Channel Wizard does not allow us to configure the
channels for the AMUX -64 card.

Could I firstly just confirm that there is no support for the AMUX-64
card using the Test and Measurement Explorer with NIDAQ 6.6.0? Will
there be future support for this card and if so when?

Also is there a work around to this? For example has someone written a
OPC server specifially for the AMUX-64 which which we can adapt for our
specific needs?
0 Kudos
Message 1 of 1