A problem with self calibration NI PCI-6251 ERROR -200545

[amisan]

hi friends,

    Well Im having a problem with the self calibration in my  DAQ NI PCI-6251.I tried the self test on MAX Explorer and the board has passed.When I make a selfcalibration appears the message"Self Calibration Failed".

    I´ve disconnected the device from external signals and Im still having the problem.What could be?I realized that the external calibration has expirated the data,might be this??.

                                                                                          Thanks in  advance.

[fsilveira]

Hi,

I would advise you first of all to reset your board. If it does not work, download and install last NI-DAQmx driver (www.ni.com/downloads >> drivers and updates). Try on. Let me know if it works.

Regards,

Fernanda Silveir

AE

NI Brazil

[dani89529]

Hi,

i am facing the same issue with PCI 6254 (M Series), i did reset and NI max showed a successful reset. Self test was also successful but self calibration was failed giving error code 200545. Do i need to perform external calibration?

[oscarfonseca]

For dani89529's question, continue the conversation in: https://forums.ni.com/t5/LabVIEW/M-series-PCI-6254-calibration-error/td-p/3978141