9253 in DAQmx mode - How to access the diagnostic LEDs and Filter Settings?

[jdean]

Hi,

We're working with the 9253 modules on cRIO 905x series devices in DAQmx mode. Documentation is pretty sparse for the 9253 features, especially for DAQmx. We're trying to set the Diagnostic LED modes and hardware filter cutoffs. There is documentation on doing this in Scan Mode and FPGA mode, but nothing for DAQmx mode. Any assistance would be helpful.

jdeantx

[jdean · Accepted solution]

So I solved my own problem just after posting this, but I thought I'd share the solution. Both filtering and diagnostic settings are set under DAQmx channel properties.

The filter settings are Analog Input > General Properties > Filter.

The diagnostic settings are found under Analog Input > General Properties > Advanced.