6 Channel differential input multifunctional USB DAQ

[faromarc]

Hey guys,

i'm looking for a multifunction DAQ like USB-6002 which i already have

http://sine.ni.com/nips/cds/view/p/lang/de/nid/212384

but i need to measure 6 channels differential input.

Do you have any recommendation on a multifunctional DAQ?

[crossrulz]

Perhaps the USB-6210 will work for you.

[Henrik_Volkers]

If the budget allows it: Avoid multiplexing ! 

Have a look at the settletime error spec! 

You haven't told us about your signal sources , needed accuracy and needed bandwidth ..

The USB 6356  or 7845R (small FPGA, migth need more thinking 😉 ) ??

[faromarc]

The USB-6210 seems perfect.

Thanks!

[faromarc]

I have 6 Channels and for each channel another GND.

So i measure 6 channels differential. Where do i connect the wires at the Pinout of the USB-6210?

[crossrulz]

For AI0, AI8 is the negative side when configured as a differential channel.  AI1- = AI9, etc.

[CataM]

---

For AI0, AI8 is the negative side when configured as a differential channel.  AI1- = AI9, etc.

---

That is the reason why those channels are very close to each other in the device pinout's.