Benchtop Measurement and Test
Distributed Measurement and Control
High-Performance Test
Systems Engineering Software
Perspectives showcases how NI sees what’s next in the world of test and technology.
You can request repair, RMA, schedule calibration, or get technical support. A valid service agreement may be required.
Provides support for NI data acquisition and signal conditioning devices.
Provides support for Ethernet, GPIB, serial, USB, and other types of instruments.
Provides support for NI GPIB controllers and NI embedded controllers with GPIB ports.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
04-05-2015 09:13 AM
Hi,
I am trying to use the SISU-1004 stepper motor module in a NI-9146 expansion chassis with the NI SoftMotion module.
It seems that I can't acces to the other C-modules in the chassis in scan mode.
Is it a way to have the scan mode available for some modules while the Sisu FPGA driver is running ?
Thanks for your help.
04-08-2015 11:06 AM
Hi JJoly,
You really can do by following this KB
http://digital.ni.com/public.nsf/allkb/0DB7FEF37C26AF85862575C400531690
Keep in mind that you don't have any Real Time OS in this chassis.
Thanks
Paolo_P Certified TestStand Architect Certified LabVIEW Architect National Instruments France
What do you need our team of experts to assist you with?
Thanks!
We'll be in touch soon!