Motion Control and Motor Drives

cancel
Showing results for 
Search instead for 
Did you mean: 

how to access PCI-7344 motion card from QNX/VxWorks

Hi, is it possible to send commands to a PCI-7344 motion-controller from a RTOS like QNX or VxWorks?

I would like to configure the 7344 once in a windows environment with MAX and then use it in production in an Industrial PC with an RTOS. is there e.g. a precompiled library for QNX or a description of how to send commands and receive status info?

Many thanks in advance for your help
0 Kudos
Message 1 of 2
(3,835 Views)
Hello Richie,

The NI-Motion (FlexMotion) driver is supported by the following OS: Win 9x, NT, 2000

In the past, National Instruments has not seen a demand for RTOS such as QNX and VxWorks for Motion Control applications.
- For a Real-Time solution, National Instruments offers LabVIEW RT for real-time OS requirements. See www.ni.com/rt for more specific information.
- If you have any additional questions, please contact National Instruments @ 1800 IEEE 488 and ask to speak to a sales representative.
0 Kudos
Message 2 of 2
(3,835 Views)