Machine Vision

cancel
Showing results for 
Search instead for 
Did you mean: 

roper coolsnap HQ camera labview

I am trying to operate the following camera: Roper Coolsnap HQ . This is a PVCAM black/white camera connected to the pc via PCI framegrabber. The camera does not show up in the Devices list in the NIMax. What should I do?

Thanks

 

0 Kudos
Message 1 of 6
(1,606 Views)

Please check with Roper to see if they provide LabVIEW drivers for their framegrabber or if their framegrabber is compatible with DirectShow.

Robert Eastlund
Graftek Imaging, Inc.
Phone: (512) 416-1099 x101
Email: eastlund@graftek.com
0 Kudos
Message 2 of 6
(1,597 Views)

Is this an NI framegrabber?  If so, which one is it?

 

Thanks,

Justin D.

Applications Engineer
National Instruments
0 Kudos
Message 3 of 6
(1,581 Views)

No. The framegrabber was supplied by Photometrics (Roper) with the camera.

0 Kudos
Message 4 of 6
(1,572 Views)

Robert is right.  Third party frame grabbers can be used with our IMAQdx driver, but they would have to be directshow compliant.

Justin D.

Applications Engineer
National Instruments
0 Kudos
Message 5 of 6
(1,559 Views)

there are two types of frame grabbers that was shipped out with the HQ, one was the snapper and the other one was the LVDS board. Unfortunately, both are not directshow compliant. What the company now offers is third party VIs supplied by rcubed as the company never had any free VIs developed.

 

Please call the support line for more information or send an email at support@photometrics.com

0 Kudos
Message 6 of 6
(1,488 Views)