From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
03-07-2011 08:30 AM
I am trying to operate the following camera: Roper Coolsnap HQ . This is a PVCAM black/white camera connected to the pc via PCI framegrabber. The camera does not show up in the Devices list in the NIMax. What should I do?
Thanks
03-07-2011 10:48 AM
Please check with Roper to see if they provide LabVIEW drivers for their framegrabber or if their framegrabber is compatible with DirectShow.
03-08-2011 02:03 PM
Is this an NI framegrabber? If so, which one is it?
Thanks,
03-09-2011 01:49 AM
No. The framegrabber was supplied by Photometrics (Roper) with the camera.
03-09-2011 05:34 PM
Robert is right. Third party frame grabbers can be used with our IMAQdx driver, but they would have to be directshow compliant.
03-21-2011 02:48 PM
there are two types of frame grabbers that was shipped out with the HQ, one was the snapper and the other one was the LVDS board. Unfortunately, both are not directshow compliant. What the company now offers is third party VIs supplied by rcubed as the company never had any free VIs developed.
Please call the support line for more information or send an email at support@photometrics.com