Machine Vision

cancel
Showing results for 
Search instead for 
Did you mean: 

pcie 1430 siicon imaging 1300M camera file

Solved!
Go to solution

I  have  to control the camera through the serial ,but not succeed

0 Kudos
Message 1 of 3
(1,593 Views)
Highlighted
Solution
Accepted by topic author changle0204

Please try NI Camera File Generator to control the camera through serial.

 

ftp://ftp.ni.com/support/imaq/pc/ni-imaq/cfgenerator/

欢迎参加 LabVIEW天下会 详见www.GSDzone.net
0 Kudos
Message 2 of 3
(1,584 Views)
Highlighted

hello。 I am using the pcie1430 and silicon imaging1300mh_cl camera ,in the manual ,Genlock mode

each CC1 trigger causes the camera to initiate frame readout . can we think that each  trigger from SMB will start a frame readout. But someone said the trigger is valid only once ,and  the camera will run at its only rate. why? which one is right ?

0 Kudos
Message 3 of 3
(1,570 Views)