03-18-2010 05:43 AM
Hello again,
I should add: after re-installing the VAQ 8.6 driver package, the error message changed to "Not enough Memory" (with a very long number as error code).
Also I should mention that another Image Aquisition program, which was delivered with the camera, still works fine.
Regards,
P. Bohr
03-18-2010 02:55 PM
P Bohr,
What image size are you trying to acquire? Also, how many images are you acquiring in your sequence? If you reduce either number, does that help?
Eric
03-19-2010 01:22 PM
Hello,
the images are around 200 x 700 pixel, slightly above 100 kB in size, if I remember corretly (they're taken by using mono-8 pixels). Aquiring a max. of 400 is possible, more produces the said error, as I have found out.
P. Bohr
04-18-2012 06:37 AM
Hi,
I also have the related error code -50353. While I was using NI Thermocouple to get the temperature values from 8 channel of device, I got a the error -50353 after some executions. I am using While loop to get the values continuously.
Why do you think ı got this error?
Thanks,
04-18-2012 07:32 AM
Also, As ı look up, I saw that Labview is using increasing memory space . The program starts with about 140MB of memory usage. Then it crashes with error code -50353 when it is using at about 750MB of RAM space.
How can I handle this?
Could you help me?