Some settings in IMAQdx .icd are not saved, some are ignored when NI MAX 19.5.0f0 opens the file

[lcady]

I'm looking for NI to resolve these problems in NI MAX with regard to the IMAQ to IMAQdx transition:

IMAQdx .icd file is missing the following attribute

Frame Grabber Attributes :: Encoder Controls :: Encoder Use IO Board Input

When NI MAX opens the .icd file, the following combination is ignored:

FrameGrabberAttributes::AcquisitionControls::TriggerSelector = "Line Start"
FrameGrabberAttributes::AcquisitionControls::TriggerSource = "Encoder"
FrameGrabberAttributes::AcquisitionControls::TriggerActivation = "Rising Edge"
FrameGrabberAttributes::AcquisitionControls::TriggerDivider = "1"
FrameGrabberAttributes::AcquisitionControls::TriggerMode = "On"

The Trigger mode will be "OFF" in NI MAX

NI MAX Saves the camera setting Trigger Mode "ON":

The .icd file says "ON"

Reopen NI MAX, the Trigger Mode is "OFF":

Trigger Mode OFF

Encoder Use IO Board Input is disabled.

Use IO Board not enabled

Camera files are attached