MATRIXx

cancel
Showing results for 
Search instead for 
Did you mean: 

PID

I have built a PID controller in labview. Ive been using time domain math, integral and continous calculation. And it works well. But I need a anti wind up.

Is there a easy way to build this? I want to build it my self, and not use the PID block. If anyone could make an easy example for me it would be great.

I have tried with case loops etc but I dont get it to work properly.

 

 

 

0 Kudos
Message 1 of 6
(12,680 Views)

Hello Remie,

For questions about LabVIEW, you should post in the LabVIEW discussion forum.  This form is for MATRIXx which is a different product.  Also, is there any particular reason you don't want to use the functionality in the PID block from the PID and Fuzzy Logic Toolkit?

 

Regards,

Angela M

Staff Product Support Engineer

0 Kudos
Message 2 of 6
(12,679 Views)
The reason for not wanting to use the PID block is that I want to get the value from 

Ygain, Yintegration, Yderivation and Y total. 

0 Kudos
Message 3 of 6
(12,672 Views)
anyone?
0 Kudos
Message 4 of 6
(12,643 Views)

Hello Remie,

As mentioned before, this forum is for questions related to the MATRIXx product, so I don't think users in this forum will have much advice on how to implement what you are asking in LabVIEW.  I see that you have already started a thread with the same question in the LabVIEW forum, so this discussion should be continued on that thread.


Thank you,

Angela M

0 Kudos
Message 5 of 6
(12,641 Views)
sorry, I wrote in wronge post.
0 Kudos
Message 6 of 6
(12,639 Views)