From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
09-16-2008 04:33 PM
Ryan
Tried to attach the diagnostic files but they are too large, around 400Megs and change.
Tried to upload to ftp incoming and it timed out.
Sorry
Roger
09-16-2008 08:39 PM
09-16-2008 09:20 PM - edited 09-16-2008 09:21 PM
09-16-2008 09:20 PM
09-17-2008 09:27 AM
Ryan
We are on 6.0.2. I installed the system in 2005.
We have 2 identical PCs both running Intel DG31pr motherboards with 1G of ram. The Core2 Duo is a dual processor.
The com port files are giving me fits right now, our ISP has been unreliable since the fires... Might be microwave tower damage.
In any case, I can't stay connected long enough to upload the zipped folder to ftp.
Got a mailing address I can send it to?
09-17-2008 09:48 AM
Ryan
We tried the 5.1 modbus but got a lot of crc errors. We went back to the 6.0.2 modbus right away.
I will try to prune the txt file and send it over.
Roger
09-17-2008 10:34 AM
Ryan
I have the 6.1 install disc:
Version 6.1
500668T-01
Is this the latest? Could I put that on the machine we are having trouble with and activate it, or do we have to buy the upgrade?
I was thinking that these motherboards ar probably Vista capable, and so is 6.1.
09-18-2008 02:26 AM
09-18-2008 10:40 AM
I will try uploading the zipped folder again today, my ISP made some changes to their system, hopefully for the better.
On 6.1, I don't have an SSP but I want to get the 6.0.2 problem figured out before we move up anyway, since it worked so well before the MOBO smoked on the old PC.
I ordered another PC with the same MOBO as the old PC last night. Should prove to be interesting.
Email is footnote AT hayfork DOT net.
I did not check the status of the update datamember, but my polling fail alarl timers were not started. Wish I had checked that.
Thanks
Roger
09-18-2008 12:34 PM
Ryan
Serial port diagnostic files are uploaded to FCS Diagnostic Files.zip
I didn't even get bumped!
Thanks
Roger