LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

what is the process to monitoring and control some reservoir and pupm?

Hello

can u help me?

what is the process to monitoring and control some reservoir and pupm?

 

I have some water tank and some pump. I want monitor and control tanks level but Im new in labview.

what tools i need?

what is the process of camputer until hardware?

can u give me step by step process?

 

0 Kudos
Message 1 of 23
(3,062 Views)

Take a look at this thread, it may be helpful: monitoring unknown tank level and control

0 Kudos
Message 2 of 23
(3,037 Views)

tnx chembo

that is my topic too.

my new question is different

best regards

0 Kudos
Message 3 of 23
(3,034 Views)

Step by step process-

 

1. Learn LabVIEW using the freely available courses. Read through the LabVIEW help.

2. Come back here and ask for the next step.

 

Pointless trying to jump into a project when you're not even familiar with LabVIEW. This may not be the answer you want, but it's the most helpful answer in terms of bringing you long-term success.

0 Kudos
Message 4 of 23
(3,002 Views)

If you don't know what sensors you have or how to program them if you do, I'd either follow toecutter's advice or pay someone to write a program.  You'll never find the answer otherwise

0 Kudos
Message 5 of 23
(2,990 Views)

Hi behzad,

 

you really should mention your very related older thread

Best regards,
GerdW


using LV2016/2019/2021 on Win10/11+cRIO, TestStand2016/2019
0 Kudos
Message 6 of 23
(2,978 Views)

@GerdW wrote:

Hi behzad,

 

you really should mention your very related older thread


Wasn't it being linked in Message 2 and him acknowledging it sufficient?

0 Kudos
Message 7 of 23
(2,961 Views)

Hi

 

 


@GerdW wrote:

Hi behzad,

 

you really should mention your very related older thread


In that topic I try to find a way to use of wizard for input data. however I wrote all process. but in this topic,  I'm trying to find

operational way to implement all of my project.

 

 


 

@natasftw wrote:

Wasn't it being linked in Message 2 and him acknowledging it sufficient?

 


actually, I need details of process. I know I have around 16 digital input/output, I have around 10 analog input. I want contol pump activity. my sensor are ultrasound level meter,pressure gauge,thermometer and like these.

 

 

 

 

 

Best regards

 

 

 

 

0 Kudos
Message 8 of 23
(2,905 Views)

Hi behzad,

 

you need to learn the basics of control systems. Wikipedia is a good source…

 

LabVIEW comes with a lot of control algorithms. PID is included in the current version, in older ones you need to install (and buy) the PID&Fuzzy toolkit…

Best regards,
GerdW


using LV2016/2019/2021 on Win10/11+cRIO, TestStand2016/2019
0 Kudos
Message 9 of 23
(2,875 Views)

Hi GerdW

tnx.

I'm acquaint with the basics of control systems. I want use of an optimization alogorithm in mathscript node instead of PID in this step.

I want input an excel file and some manual set as Input of system to exe program. and then start work. can u explain dedtails from program, interface, and hardware connections? is necessary any toolkit yet?

0 Kudos
Message 10 of 23
(2,860 Views)