From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
03-24-2010 02:20 AM - edited 03-24-2010 02:21 AM
When I tried to open the vi in a new laptop, it report vi missing as the attached screenshot.
It seems from NIscope, so I installed it and try again, but still the same.
I am using LV2009, any suggestion, thanks.
Solved! Go to Solution.
03-24-2010 02:32 AM
03-24-2010 02:46 AM
03-24-2010 02:59 AM
03-24-2010 03:06 AM
I am using USB 5133 with general function, does I still need to install these special driver.
By comparision, the folder below is missing.
C:\Program Files (x86)\National Instruments\LabVIEW 2009\instr.lib\niScope
I manaully copied some folder but seems still some dll missing.
03-24-2010 03:14 AM
I suppose the location in right and seems you have got the instr.lib already.
03-24-2010 03:35 AM
03-24-2010 04:16 AM
03-24-2010 04:17 AM
Instead of trying to copy the files from niScope, I think installing it would be better.
Probably you have the drivers on DVD, or you can download them from the NI website: http://joule.ni.com/nidu/cds/view/p/id/1492/lang/en
03-24-2010 04:18 AM - edited 03-24-2010 04:18 AM
ah, I see you've got the same idea
Since you're installing anyway you might want to use NI-SCOPE 3.6.