signal generation

[ali9963]

Hello,

I want  simulated pulse  with respect to time and voltage, the time and voltage reading are addressed in Pulse.png, i have also attached vi.

Regards,

Ali

[ali9963]

Missing time can be taken as 50ms

[GerdW]

Hi ali,

there is a full palette of signal generation functions.

All you need are some ramps…

[ali9963]

Hello GerdW,

My requirement is at the time period and voltage has to be defined,

For example

at 50ms the voltage should be 12v, at 100ms the voltage should be 12v,120ms the voltage should be 6v etccc..please find the attached requirement doc, and do the need ful

Regards,

Ali

[ali9963]

The output signal will be given to the daq

[ali9963]

yes, i need to give this generated signal to the hardware.

[GerdW]

Hi ali,

For example at 50ms the voltage should be 12v, at 100ms the voltage should be 12v,120ms the voltage should be 6v etccc

You need to append the following ramps:

- from 0ms to 50ms from 0V to 12V

- from 50ms to 100ms from 12V to 12V

- from 100ms to 120ms from 12V to 6V

You need a loop, RampPattern and BuildArray…

Choose the timing resolution (dt of a waveform, number of samples for RampPattern) according to your requirements and hardware specs…

[ali9963]

Can you please attached an example vi

[GerdW]

Hi ali,

here's a simple example:

What have you tried so far?

Where are you stuck?

[ali9963]

I have done a vi which is attached and i want to give this output to DAQ but it was throwing error.is there any way to generate a defined signal.