LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

send command to linear ccd

Solved!
Go to solution

Hi

i've problem with send command to linear ccd.(tcd1304ap toshiba). MAX can detect the ccd but i don't know how send these commands to ccd. 

 

0 Kudos
Message 1 of 6
(3,317 Views)

How is this linear CCD connected to your PC?  Serial port?  Digital input/output signals in a DAQ card?

0 Kudos
Message 2 of 6
(3,291 Views)

the ccd connected to the pc by serial port. 

0 Kudos
Message 3 of 6
(3,272 Views)
Solution
Accepted by topic author arsham.hamidi

did you test your ccd comment by other softwares like hyper terminal , versaterm
,putty or x-ctu ?
it is better to check your comments working correctly before jump in labview programming

0 Kudos
Message 4 of 6
(3,263 Views)
Solution
Accepted by topic author arsham.hamidi

Then you can use VISA to read and write commands to the serial port.  There are examples in LabVIEW.  But you are better off searching the forums for messages about serial port communication.

0 Kudos
Message 5 of 6
(3,249 Views)

thank you for your help,i finally find out what was my problem

0 Kudos
Message 6 of 6
(3,169 Views)