robotics

[Pramanibbir]

I want to simulate a 3 joints and 2 axis Robotic
arm.
um not concerned with the hardware part.
please help

[RavensFan]

Help with what?

Please provide some more information like where you are stuck or any specific questions you have.

http://www.catb.org/esr/faqs/smart-questions.html

[Pramanibbir]

actually i m nt being able to even start dis project. need some resources or ebooks to start with since i m new to Labview n there is not much tym for me to start all over from scratch. if someone could suggest me something from where i can derive the ideas n concepts for dis project would b very helpful.
thanx in advance

[buickgn]

start here: http://bit.ly/1BzBCoI

[Barp]

This you must acquire (generally, universities have this available for you) and install the LabVIEW for Robotics. This is a addon into LabVIEW that allow you to create autonomous robots or robotics arms.

http://sine.ni.com/nips/cds/view/p/lang/en/nid/209856

http://www.ni.com/white-paper/11564/en/

There is also an evaluation version available for your project, if you don't have available.

Hope this helps,

[Pramanibbir]

Actually i need to develop a robotic arm with 2 links and 3 joints and that should be controlled by input buttons or slides..i dont need any hardware like sensors n all.. it would be helpful if i get a solved one.. as i dont have that much time to learn everything on LabVIEW Robotics 😞

[Munna232]

Check it in LabVIEW Examples.

you will get nice example.