From 11:00 PM CDT Friday, Nov 8 - 2:30 PM CDT Saturday, Nov 9, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

relay matrix

Hi,

 

I am looking for a standalone GPIB or USB relay card with 16 relays or more that

will work with Labview V6.1 and that can be purchased in the UK.

 

Thanks in advance.

 

0 Kudos
Message 1 of 4
(2,716 Views)

Finding something that will work with LabVIEW 6.1 may be a little tough concidering it is over 13 years old.  But you might want to give the guys at Pickering a call.


GCentral
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
"Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5
0 Kudos
Message 2 of 4
(2,710 Views)

NCD has a faily wide series of boards and a rather simple command syntax that should make creating a driver simple even in 6.i


"Should be" isn't "Is" -Jay
0 Kudos
Message 3 of 4
(2,705 Views)

Keithley and HP Agilent Keysight both sell standalone switching units that have plug-in matrix cards. Some (most?) of the systems have GPIB, as well as USB and Ethernet, so even an old version of LabView should be able to talk to them.

0 Kudos
Message 4 of 4
(2,703 Views)