I need to determine if there is a way to command output to the ni6009 D/A channels in RAW binary format rather than decimal.
I have done this for input from the module, see jpg. The Labview DAQmx read has a RAW option which works for input. It also seems to have the same for the DAQmx write seems to have the same, but I've not gotten it to function as of yet.
Any help would be appreciated, ultimately this will be used to control output from NI-9264 16bit modules.
1) Understanding how to best get the most fine control of NI9264 modules.
2) Understanding how to command this fine control using labview 2012 and DAQmx.
Thanks