To change the mechanical action of a boolean control context-click on the control and select Mechanical Action (near the bottom of the pop-up menu). Switch when Pressed is probably the choice you want if you will be using locals.
Latch when Released is the default action for Stop and OK buttons because the switch setting returns to False when the switch is read by the program. This makes it behave like a momentary switch. Because of the way dataflow works, the Latch type actions cannot be used with local variables.
i've tried it but didnt work..i make a local variable from loop 1 and connect it to stop at loop 2 and vise versa but still cannot
NO! No local variable needed here! Keep it simple! Delete the stop button in the left loop and place the remaining stop button in its place. You don't need the terminal in the event loop.
The UI loop has an event structure and and event case for a value change on the stop button, thus there is no need to have any local variable there. You have one event case shared for "clear" and "stop", thus simply invert the "clear" and wire to the loop condition. Two possible cases:
i need some help to change my vi (attached)
as u can see my current program looks like this - if 2byte receive is 1111 then the value after it will goes to 1111 column then if 2222 then it goes to 2222 column but i want to change it to be like this - i'll receive one frame containing 7bytes continuously, so then i want my program to make byte2 go to column 1111,byte4 to column 2222,byte6 to column 3333 and byte7 to column 4444...im only need 4 data here..the received byte is in hex but i want it in decimal as it is put into the table
sorry for the trouble before
the problem is the received data i got is not like what i expecting before..so i need to make some change to this vi
now i received continuous frame..each frame contain 7byte which is 7 different data..but im only want 4 data from this 7 which is byte2,byte4,byte6 and byte7..and i want it to be put into my table in decimal value
yeah that maybe trivial for u but its hard for newbie like me..i try delete the ordered tags part and its connection but still cannot
attached is how the 7byte data received will looks like..and the manual for the data
so here i want my program to get the value of input voltage,input current,output voltage and temperature into the table each time i received it
really need ur help for this one