11-08-2010 02:35 AM
Hi,
I use a NI USB-232 converter on Windows 7 Prof 64 bits. Windows 7 says that peripheral works well but MAX doesn't identify it. In MAX, I see "Manufacturer Unknow Model Unknow".
I already have installed the pack NI VISA full 5.0.1 and use the VISA Driver Wizard .
What can I do?
Thanks
François
Solved! Go to Solution.
11-08-2010 03:34 AM
Hi Francois,
What peripheral is it that you are plugging into the USB-232? It may just be a compatibility issue.
Regards,
11-08-2010 04:03 AM
The peripheral is the serial port (RS232) from GPS Autofarm (mounted on a tractor).
I already work with this GPS and LabVIEW 7.1 and it works well. Now I 've changed my laptop (with no RS 232 port) so I try to use the NI USB-232 on LabVIEW 8.6.
François
11-15-2010 02:04 AM
Hi,
It still doesn't work...
François
11-26-2010 03:16 AM
Hello François,
Have you tried using the NI Serial driver (http://joule.ni.com/nidu/cds/view/p/id/2056/lang/en )?
11-26-2010 06:15 AM
Hi,
I've already installed this one. I contact NI Support and they found that my problem is coming from Seven. I received a way to uninstall older drivers on Windows 7 and now it's OK.
Thank you