LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

lock in amplifier

Highlighted

I wan to use of  lock-in amplifier SR830 in the three omega experiment and I need to have a range of frequency and fo reach frequency I want to measture

thrid harmonic voltage. I connect the lock-in amplifier to the function generator and run the sweep frequency program of Function generator 33120A.

 

I wounder how I can get the frequency through lock-in amplifier and measture the thrid harmonic voltage for each frequency the function generator sweep.

 

Many thanks for your reply.

 

 

0 Kudos
Message 1 of 2
(844 Views)

hi

the sr 830 can be locked to a source (on the rigth side of the front panel you can swicth from internal synch and external synch); you have to put a TTL signal through a BNC near the synch selection)

then, get the SR 830 driver, and lear how to control it through labview

N

 

PS if you are thinking of the three omega as proposed by cahill, make sure you have the correct formula, there is a factor of 2 error in the dT formula, corrected in another subsequent paper by cahill

0 Kudos
Message 2 of 2
(805 Views)