LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

labview drivers for Prisma QMS

Hi Stoad,

 

Finally I could read the OPC data! The problem seems to be permissions. I was receiving errors on all OPC clients, something like "access denied 0x80070005". I was running the aplications as normal user (Im supposed to be admin on win10 but I dont know...) and realised that if you run the aplications (Matrikon and LabView) as administrator (right-click->run as administrator) there is no problem retrieving data.

Im writing this just to thank for your help, couldnt be possible without it.

Have a good time on the other side of the world!

0 Kudos
Message 61 of 95
(1,694 Views)

Hello Gernot,

 

I have recently faced the issue of controlling QME 200 (via RS-232) from the LabView environment. I would be very grateful for any help, especially including VIs.

 

Thanks in advance,

 

Witek Piskorz

 

0 Kudos
Message 62 of 95
(1,630 Views)

Dear Witek

 

Here I have attached a few Vis to help you to communicate with the QMG200.

These are only fundamental Vis.

Hope they help you to get a step forward.

Gernot Hanel
IONICON Analytik Gesellschaft m.b.H.
Message 63 of 95
(1,613 Views)

@nottilie wrote:

Dear Witek

 

Here I have attached a few Vis to help you to communicate with the QMG200.

These are only fundamental Vis.

Hope they help you to get a step forward.


Interesting! Is it possible to get the checksum VI?

Message 64 of 95
(1,610 Views)

The checksum is calculated here

 chksum.JPG

 

Gernot Hanel
IONICON Analytik Gesellschaft m.b.H.
Message 65 of 95
(1,607 Views)

Alles klar! 🙂

0 Kudos
Message 66 of 95
(1,605 Views)

Thank you so much! You have saved me a lot of time 🙂

 

Best regards,

Witek

0 Kudos
Message 67 of 95
(1,597 Views)

You are welcome

Gernot Hanel
IONICON Analytik Gesellschaft m.b.H.
0 Kudos
Message 68 of 95
(1,595 Views)

HI ,

Gernot 

 

i have same problem and i have Quadera software but the picture you share for OPC server in Quadera i couldnt found it. looking forward for your positive answer.

 

Regards,

Taufeey

0 Kudos
Message 69 of 95
(1,501 Views)

Dear Taufeey

 

I am really sorry but I cannot find out what your question is.

This tread has many different topics. 

It started only with the serial communication of Pfeiffer Prisma and the went to the OPC communication of Prisma+.

 

So please explain your problem clearly so we can "hopefully" help you if we have an answer.

 

Cheers

 

Gernot

Gernot Hanel
IONICON Analytik Gesellschaft m.b.H.
0 Kudos
Message 70 of 95
(1,497 Views)