LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

keithley 2401, compliance

Highlighted

Hello

I am looking for the option to change the compliance of the Keithley 2401 in labview.

How I can do this?

0 Kudos
Message 1 of 4
(466 Views)

If you use the driver found here -

 

http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=1583

 

Then when you configure the sense options one of the parameters is to set the compliance.

 

The SCPI command is something like..

 

Smiley FrustratedENS:CURRSmiley TongueROT 10E-3

 

To set a 10mA compliance when sourcing voltage or..

 

Smiley FrustratedENS:VOLTSmiley TongueROT 10

 

To set a 10V compliance when sourcing current.

 

Read the manual to get the limits of the compliance right if you are using a fixed range measurement.  

0 Kudos
Message 2 of 4
(442 Views)

I thank you very much

Unfortunately I did not find driver for the configuration of the sense options.

Can you help me with this?

0 Kudos
Message 3 of 4
(398 Views)

If you download the driver, look at the VI tree and select the VI "Configure Output.vi" then one of the outputs is the compliance level.

k2400_config_output.jpg

 

 

 

0 Kudos
Message 4 of 4
(390 Views)