keithley 2401, compliance

[smariadu\]

Hello

I am looking for the option to change the compliance of the Keithley 2401 in labview.

How I can do this?

[cstorey]

If you use the driver found here -

http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=1583

Then when you configure the sense options one of the parameters is to set the compliance.

The SCPI command is something like..

:SENS:CURR:PROT 10E-3

To set a 10mA compliance when sourcing voltage or..

:SENS:VOLT:PROT 10

To set a 10V compliance when sourcing current.

Read the manual to get the limits of the compliance right if you are using a fixed range measurement.  

[smariadu\]

I thank you very much

Unfortunately I did not find driver for the configuration of the sense options.

Can you help me with this?

[cstorey]

If you download the driver, look at the VI tree and select the VI "Configure Output.vi" then one of the outputs is the compliance level.