04-03-2014 05:23 AM
hey,
i want to increase vertical height of numeric controls in front panel but while doin so i dont want to increase distance between increment and decrement buttons of control.i tried to increase the height but using property node.but i find after certain limit the distance starts increasing. i have attached my file. if this cannot be done. suggest me some way to increase or decrease the controller value by using separate buttons of large size like shown in next file.
vanashree
Solved! Go to Solution.
04-03-2014 05:40 AM
Vanashree,
you have to create your custom control having the correct size and component placement.
You can create a custom control by right-click on the default control and select Advanced >> Customize...
Please refer to the help for how to use the customization tool.
Norbert
04-05-2014 06:48 AM
hey..i right clicked on the num control>>advanced>>customize, the num control was opened in separate window.what do i do next?.is customization a toolkit?or just a setting?
04-05-2014 07:00 AM
is there any other option?
04-05-2014 10:40 AM
04-05-2014 11:15 AM - edited 04-05-2014 11:16 AM
USe the "system spin control", it scales much nicer.
This is how it look in Windows 8.1:
(NOTE: the exact look of system controls will depend on the OS and desktop theme)
04-05-2014 10:23 PM
you are just superb...i tried spin control thanks a lot..this is for my masters project and i am really glad...thankyou so much..:)
04-05-2014 11:25 PM
hey altenbach i am communicating labview with arduino using visa.i have achieved the communication.now my problem is:
i want the transmission of data from labview to hardware to begin only after clicking a OK button below the the specific control as shown in second attachment.(separate OK buttons for frequency, tone intensity and noise as in my application.).i have attached my program in first kindly go through and my desired OK button below frequency control in second.
regards,
vanashree
04-05-2014 11:57 PM
hey i am communicating labview with arduino using visa.i have achieved the communication.now my problem is:
i want that after running front panel, user must select the desired values from the numeric controls and then transmission of data (codes in my case) from labview to hardware begin only after clicking a OK button .i have attached my program in first kindly go through and my desired OK button or any other option which will transmit the selected codes after clicking this option as in second attachment.
note: all codes transmitted from labview to arduino only once.
regards,
vanashree
04-06-2014 01:26 AM
Offtopic arduino discussion continues here