LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

hyber termial in labview

A framing error typically points to a setting that is not right.  Double check your serial settings.


GCentral
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
"Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5
0 Kudos
Message 11 of 18
(529 Views)

@KPRO wrote:

Attached is the screen shot of the LV. Thank you very much for your help.


Please post the actual code!  Many of us will not open an attachment in a propriatary format (Word docs can get easilly infected with viruses)


"Should be" isn't "Is" -Jay
0 Kudos
Message 12 of 18
(519 Views)

1. 2 bytes is number of byte counted when reading (I did not set this)

2. I did try to set the input buffer larger 1045, but still reading only 2 bytes

3. Double check serial port setting but not much luck

Well, Thank you very much for your help, I need to do more research for this.

Khanh

0 Kudos
Message 13 of 18
(518 Views)

I should've spotted this immediately.

 

The garbage returned in the VI should've prompted me to look at your hyperterm screen shot.  The baud rates are different.  Fix that and it should work.

Bill
CLD
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.
Humble author of the CLAD Nugget.
0 Kudos
Message 14 of 18
(501 Views)

Thank you very much. You are absolutely right ... It's working now

0 Kudos
Message 15 of 18
(485 Views)

billko wrote:The baud rates are different.  Fix that and it should work.

You mean it really was a serial setting.  Wow, I sure wish I would have said something earlier.


GCentral
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
"Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5
0 Kudos
Message 16 of 18
(476 Views)

@crossrulz wrote:

billko wrote:The baud rates are different.  Fix that and it should work.

You mean it really was a serial setting.  Wow, I sure wish I would have said something earlier.


LOL you're rarely, if ever, wrong... but in order to figure out that you were correct, we had to travel a long and winding road... 😄

Bill
CLD
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.
Humble author of the CLAD Nugget.
0 Kudos
Message 17 of 18
(454 Views)

Hi

 

Please Check With this

 

https://decibel.ni.com/content/docs/DOC-16283

https://decibel.ni.com/content/docs/DOC-16283

 

Regards

Prabhakant

Regards
Prabhakant Patil
0 Kudos
Message 18 of 18
(437 Views)