how to communicate with Micrex-F Fuji PLC

[Asif138]

hello to all

i want to read/write address of Micrex-F fuji PLC but this model is not available in OPC server. what is other way to communicate with PLC and how?

Regards,

asif 

[Sil.VI]

Hi Asif, 

I am assuming that when you say you want to read/write from the fuji PLC you mean to read and write form LabVIEW. Based on this, there are multiple ways to communicate a PLC with LabVIEW. I would recommend you to check this document and define which is the interface that is more convenient for your project. 

Hope you can find this information useful!

[Asif138]

Thanks for your replay

i tried by  modbus but failed, as there is no Micrex-F fuji PLC in opc server so is it possible to that PLC in opc either by updating opc server of installing new opc server?

i have made project with siemens PLC as it is in OPC server.

any suggestion ?

Thanks,

[SabariSaravanan.M]

Check your PLC series with as follows link, whether NI OPC server supporting your selected PLC or not.

http://www.ni.com/product-documentation/6417/en/#toc14

[Asif138]

my PLC model is not listed here. how can i communicate now. my PLC is Micrex-F Fuji PLC

Thanks,

asif iqbal 

[SabariSaravanan.M]

If your selected PLC not listed in NI supported device list you can't communicate with NI OPC server. Meanwhile try out that in Modbus communication from follows attached files;

[Asif138]

cant do that....