LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

fpga

Solved!
Go to solution
Highlighted

hello guys i'm a debutant on the Labview Language and i have a project on the regulation of a stepper Motor usin CompactRio , in the first time i want to realize a Scan Mode , so where i should create the VI , in the Host or in the real Time , what doses mean the host and the target help me plz and thnx for your support 

0 Kudos
Message 1 of 3
(908 Views)
Highlighted

in compacrio the data read from DAQ cards Digital IO cards via fpga which is named as target . then from fpga the data is transfer to host (RT controller). you will get the detail from following i hope

 

http://www.google.com.pk/url?q=http://www.ni.com/pdf/products/us/criodevgudsec2.pdf&sa=U&ei=OQxDU6ma...

Message 2 of 3
(900 Views)
Highlighted
Solution
Accepted by topic author Mr-Mohamed
Be aware that not all modules support scan mode. The stepper module is one of them. There is a document called ' c series support' www.ni.com/white-paper/8136/en/
Never fear. Fpga is easy 😉
Message 3 of 3
(886 Views)