From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
04-05-2011 10:12 AM
Does anyone have a driver for Full Gauge equipments?
The FG uses a FGBUS protocol to comunicate with the temperature controlers...
Someone have this driver to use with de labview?
Thanks,
Márcio
04-06-2011 03:50 PM
Olá Márcio.
Infelizmente creio que não há um dirver de instrumento já criado para o seu equipamento. Desta forma segue abaixo dois links que te ajudam a procuram melhor ou até solicitar a criação deste driver e também a criar seu próprio driver de instrumento.
http://digital.ni.com/public.nsf/allkb/78FDB0C0DA2448E8862573B8005B64ED?OpenDocument
http://zone.ni.com/devzone/cda/tut/p/id/3271
Se o você puder informar como é feita a comunicação do equipamento com o computador, talves possa lhe fornecer uma ajuda mais fácil e detalhada.
Atenciosamente.
Hello Mário.
Unfortunately I think there isn't an instrument driver for you equipment. So, in this case please find below two links that will help you on finding a specifically instrument driver and will help you on building your own driver.
http://digital.ni.com/public.nsf/allkb/78FDB0C0DA2448E8862573B8005B64ED?OpenDocument
http://zone.ni.com/devzone/cda/tut/p/id/3271
If you could, please tell me how is the communication between the equipment and the host PC so than I can show you specific examples.
Sincerely
04-07-2011 01:07 PM
Obrigado pela resposta...
Me foi passado um link com uma dll , que é o driver de comunciação...Neste link existe também um doc pdf que explica as funções ,porem não sei como urilizar a dll...
É possivel usar a dll?Tenho que entrar com mais quais dados?
http://www.fullgauge.com/FGBus_Driver_PTB.zip
Obrigado,
Márcio
04-07-2011 02:57 PM
Olá Márcio.
Segue um link que irá lhe ajudar a comunicar essa dll com a LabVIEW. Note que é importante saber como essa dll funciona para que você possa chamar suas funcões corretamente no LabVIEW.
http://digital.ni.com/public.nsf/allkb/99AE621361C8D2CF862576A9006025FB?OpenDocument
Já o tutorial abaixo lhe ensina a estabelecer uma comunicação entre o equipamento e o computador através de uma porta USB utilizando o NI VISA.
http://digital.ni.com/public.nsf/allkb/D391008FA762E22286257761006EE3F4 (portugues)
http://zone.ni.com/devzone/cda/tut/p/id/4478 (inglês e mais detalhado).
Caso você não possua o NI VISA o utilize este outro link para fazer o download
http://joule.ni.com/nidu/cds/view/p/id/2251/lang/en
Atenciosamente.
Hello Márcio
Please find below a link that will help you to communicate this dll with LabVIEW. Notice that is important to know how this dll works to be able to call its funtions correctly in LabVIEW.
http://digital.ni.com/public.nsf/allkb/99AE621361C8D2CF862576A9006025FB?OpenDocument
The tutorial below will help you to connect your equipment and the PC by an USB port using the NI-VISA.
http://digital.ni.com/public.nsf/allkb/D391008FA762E22286257761006EE3F4 (portuguese)
http://zone.ni.com/devzone/cda/tut/p/id/4478
If you don't have the NI VISA on your computer, please download it using this other link
http://joule.ni.com/nidu/cds/view/p/id/2251/lang/en
Sincerely.