I'm sorry but this example is for CAN controllers. Yo needs an CAN interface to control these motion Controllers. In this link you can read:
"...To communicate with the EPOS you need a HighSpeed CAN Device from National Instruments found below."
The LLB is based on NI-CAN driver functions, so you needs a NI CAN device controlled by this driver.
I have successfully developped several applications using this setup. The EPOS ship with a CD-ROM containing the LV library. Contact your local maxon motors office if you should miss this library. Attached is (may be not the least version of) a document that shows how to control an EPOS with LV.
mikiplus86 a écrit:
but is completely sure that it's possible to control the Epos with LabView using RS232