LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

designing high pass filter for fpga


Dear Labview users,
                                     I am using compact rio 9002 & FPGA 9101 and labview 8.0.  A signal of 1kHz of sine wave with some DC components will come from a photo detector, here what i have to do is getting only the 1kHz sine wave signal rejecting the dc components. We have newly bought digital filter design tool kit also, but i dont know how to program a high pass filter cut off frequency of 800Hz in the FPGA side with this tool. Can anybody help us by suggesting the way to do this or ship an example of high pass filter cut off frequency of 800Hz for the FPGA side.


Labview Lovers.
0 Kudos
Message 1 of 2
(2,424 Views)
Duplicate post. See http://forums.ni.com/ni/board/message?board.id=280&message.id=2047#M2047
Doug M
Applications Engineer
National Instruments
For those unfamiliar with NBC's The Office, my icon is NOT a picture of me 🙂
0 Kudos
Message 2 of 2
(2,400 Views)