LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Temperature Control

 

Dear  All

 

I want to control temeprature of a heater , that is ON/OFF controller and make ON/OFF AC supply to  heater element.  I  have DAQ 6008, K-type temp sensor and realy with coil voltage of 12Vdc , so can i drive my realy coil using the output voltage from the DAQ? if not any solution ..?

 

Thx

0 Kudos
Message 1 of 3
(2,216 Views)

Pls. That is Relay not Realy**

 

Thx

0 Kudos
Message 2 of 3
(2,209 Views)

The USB-6008 digital outputs are 5 V and low current so they cannot drive the relay directly.  Try connecting a driver IC like the ULN2000 series between the DAQ device and the relay.  You will also need a 12 V power supply.

 

Lynn

Message 3 of 3
(2,207 Views)