From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
I want to control temeprature of a heater , that is ON/OFF controller and make ON/OFF AC supply to heater element. I have DAQ 6008, K-type temp sensor and realy with coil voltage of 12Vdc , so can i drive my realy coil using the output voltage from the DAQ? if not any solution ..?
The USB-6008 digital outputs are 5 V and low current so they cannot drive the relay directly. Try connecting a driver IC like the ULN2000 series between the DAQ device and the relay. You will also need a 12 V power supply.