LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

String for Reading PV from Eurotherm 2404

THANKS YOU VERY MUCH ALL. The connection between Labview and Eurotherm 3508 with ethernet is OK.
Have a good day !

Cath
0 Kudos
Message 31 of 49
(2,047 Views)

Hello,

Did you send programs to the eurotherm? or just SP?

I am triyng to send a program to the eurotherm to perform it later using the comand run! 

Can you post your code, maibe it can help me...

Thanks

Tim

0 Kudos
Message 32 of 49
(1,931 Views)

Hello,

I send you my vi. In fact, I send to Eurotherm only the PV value in two channels.

(Labview 7.1)

 

Cath

0 Kudos
Message 33 of 49
(1,927 Views)

Sorry,

the vi is not complete.

See the next

 

Cath

0 Kudos
Message 34 of 49
(1,925 Views)

You are able to program a Eurotherm device with the iTools programmer. What you are able to do on it obviously depends on the controller you are using, but it may well be worth looking into

 

 

Message Edited by yenknip on 03-26-2009 02:27 PM
_____________________________
- Cheers, Ed
0 Kudos
Message 35 of 49
(1,918 Views)

Hello Cath 

Thanks for the Vi can you send the MB Ethernet Master Query.

How do you control temperature that way?

Because i always use the program function from the eurotherm models like 2408 and 2704 but this one 3508 is put my head upside down...

Do you know anything about a multiply factor for temperature?

Hi, Ed thanks for the response i know i can use the Itool i always use it to see if the instructions where writen correctly.

But i want to make an itegrated solution send info and read data, put it run.

Thanks

Tim

Message Edited by timoteo on 03-26-2009 09:36 AM
0 Kudos
Message 36 of 49
(1,915 Views)
Continued here.
0 Kudos
Message 37 of 49
(1,908 Views)

Hi Tim,

next the MB...

For the control of temperature, I have an external loop who calculate the temperature (SP) and send ton my eurotherm. vi.

 

For the multiplicator, you see I multiply the temperature by a factor of 100, I don't remember exactly, but it was to obtain the good value (resolution of eurotherm) .

 

Cath

 

0 Kudos
Message 38 of 49
(1,904 Views)

Hi Cath

The MB is not complete it as sub VI that are not inclued...

Thanks and sorry for the troubles

Tim

0 Kudos
Message 39 of 49
(1,897 Views)

Sorry,

you must download the ModBus library in the next adress.

 

http://zone.ni.com/devzone/cda/epd/p/id/4756

 

Please, see the note with Thorsten in the prewiew pages in this forum.

 

Cath

 

 

0 Kudos
Message 40 of 49
(1,882 Views)