Speech Recognition Software

[tomnz]

I tried this some 6 years ago using Labview 7 and Dragon. It was based on an example on the net and used active-x on LabView.

Worked fine. Dragon is the best but their development SDK used to be free and is now 5K!

[POOJEE]

thank you!

[pmpbe]

I am working on a similar project on labview base. would you be so kind to help me woth it?

Please send the VI and information of the project that you did.

[NJKirchner]

pmpbe,

Are you working on a platform that might be able to use LVSpeak Basic?

http://lavag.org/topic/15955-labview-speak-basic/

Feel free to reach out if you run into diffficulties.

~,~

Norm

[GSVK]

Hello,
I am working on voice recognization in LabVIEW, can you help me out on how to interface dragon naturally speaking into LabVIEW using active x

[tomnz]

---

@GSVK wrote:

Hello,
I am working on voice recognization in LabVIEW, can you help me out on how to interface dragon naturally speaking into LabVIEW using active x

---

---

@GSVK wrote:

Hello,
I am working on voice recognization in LabVIEW, can you help me out on how to interface dragon naturally speaking into LabVIEW using active x

---

That was 15 years ago. I have no idea how present day dragon works. 

[GSVK]

okay, but do you have any idea how you approached then.. using active x or is there any specialized pallete for the dragon to interface in LabVIEW.

I have gone through many discussions and found there is an old example that is used for an earlier version of Dragon software but that example is not opening now,
https://forums.ni.com/t5/LabVIEW/active-x-dragon-naturally-speaking-commands/m-p/994934?profile.lang...

if you have any example or information regarding this, Guide me.
Any piece of information is helpful for me to understand how to interface the dragon into LabVIEW.

[tomnz]

It was the old NI demo I used that had active x. It would be way out of date. if you cannot open it ask NI - they will do it for you and convert to a newer version. however, Dragon may well have changed significantly by now. I tried the microsoft SDK and it was rubbish - that was 10 years ago or more too however.