Set line to logic high on USB-6501

[stephenb2]

Hopefully this is an easy one.

I am trying to write a VI to set a line high and leave it there (port 1 line 6 in my case).

How can I do that? TIA.

[arteitle]

What do you have so far? Presumably you're using DAQmx?

[stephenb2]

I have the attached file. Just running it doesn't work. But opening the DAQ assistant, clicking run, and then 'OK' and closing the VI does set the line high.

[ELNO]

Hello,

When you run a code your getting any errors? If NO then use multi meter to check the physical voltage in the port 1 line 6 you should get 5v as output when line is high.You can also use MAX test panel to verify.(MAX-->Devices and interfaces-->USB-6501-->Test panels) in that select port 1 line 6 and make it high then check in multi meter weather you are getting voltage or not.

[stephenb2]

with input

It seems like I needed an input to run the containing VI, which I didn't need when I ran from within the express VI.