Showing results for 
Search instead for 
Did you mean: 

Sending commands to RSPD 3303X-E power supply

Go to solution

Hi All, 


I have a RSPD 3303X-E power supply that I would like to control through labview. I keep getting an error message as follows: Error-1073807343 occured at VISA Open in


Possible reason(s):

VISA: (Hex 0xBFFF0011) Insufficient location information or the device or resource is not present in the system.


I am able to send the ID query command using NI MAX but cannot achieve the same in LabVIEW using the NI-VISA library.


I have included a copy of the file for your reference. I will be grateful if you can help me. Perhaps can you provide LabVIEW examples for sending commands to RSPD 3303X-E.


Thank you in advance.



0 Kudos
Message 1 of 4
Accepted by topic author Mohkey
Message 2 of 4

Thank you for the link. I managed to find the specific driver for RSPD 3303X-E in NI library and it works fine now. One can find it under the manufacturing name Siglent Technologies. 


Thanks again.


0 Kudos
Message 3 of 4

Also wanted to share the file in case someone needs it 😊


0 Kudos
Message 4 of 4