LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Rigol Signal Generator

Hello.

I want to generate a sine signal with this instrument using the VISA patterns.

I sent the messages I found on the manual. Attached there is the VI. The signal generator is the Rigol DG1022A.

The problem is that it doesn't generate anything..... where is the mistake?

Thank you.

 

 

0 Kudos
Message 1 of 7
(1,754 Views)

Hi.

 

In instruments driver network you can get driver and examples for DG1022. Perhaps it can help in your application.

http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/es/pg/1/sn/ssnav:idr/q/dg1022/

 

Cheers.

Alipio.

---------------------------------------------------------
"Qod natura non dat, Salmantica non praestat"
---------------------------------------------------------
0 Kudos
Message 2 of 7
(1,739 Views)

The problem is that I start using them and I got this error

0 Kudos
Message 3 of 7
(1,722 Views)

Hi.

 

Can you try the Labview example in Rigo site?

 

http://www.rigolna.com/products/waveform-generators/dg1000/dg1022/

 

Select software tab and look for Labview 2011 general example.

 

 

Cheers.

Alipio.

---------------------------------------------------------
"Qod natura non dat, Salmantica non praestat"
---------------------------------------------------------
0 Kudos
Message 4 of 7
(1,715 Views)

which example are you talking about?

0 Kudos
Message 5 of 7
(1,710 Views)

Please, go to this link: http://www.rigolna.com/products/waveform-generators/dg1000/dg1022/

 

Scroll down the page and under FAQS you can see the examle for Labview. Download it and try to see what happens.

 

 

Attached is a copy of that example.

 

Cheers.

Alipio.

---------------------------------------------------------
"Qod natura non dat, Salmantica non praestat"
---------------------------------------------------------
0 Kudos
Message 6 of 7
(1,706 Views)

I had the same issue. The Rigol DG1022Z that I am using did not work with LabVIEW even with the example from the Rigol site with the driver installed. Connecting the PC to the rear USB 2.0 B port made the device visible under the "VISA resource name" field with a long name as " USB::0x......" and the example worked fine. 

 

A question I have is: why doesn't it work from the front panel USB port?

 

Rigol tech support stated that it should work seamlessly.

I am finding it hard to figure out why.

0 Kudos
Message 7 of 7
(566 Views)