07-10-2019 02:18 PM
Good afternoon, I have a project that reads several sensors and also communicates with arduino. From labview can turns on several motors, it works perfectly, but I would like to instead of registering every second register every 60 minutes, instead every second. If I put on timer 60000, it takes 60 seconds to turn on the motors.
Forgive my English is not very good. thanks.
Greetings.
I leave the project.
07-10-2019 02:52 PM
Well your problem is you are not using a proper program architecture.
I would use a simple State Machine in this case with separate states for initialization, monitoring, recording, controlling the motors, etc...
07-11-2019 03:51 AM
@RTSLVU ha escrito:
Well your problem is you are not using a proper program architecture.
I would use a simple State Machine in this case with separate states for initialization, monitoring, recording, controlling the motors, etc...
RTSL Thank you very much for responding, you can send me a link or an example pic. Greetings.
07-11-2019 06:02 AM
07-14-2019 11:30 AM
Hello gerdw
I'll do that, thanks.
Greetings.
Joaquin