02-12-2013 10:39 AM
Hello I have USB card 6009 and I take analog voltage from some analog inputs. I displaying on waweform but I dont know how simplest get on axis X real time form pc with date. Is it some easy way? Thanks
02-12-2013 11:25 AM
Right click on the graph and make sure Ignore Time Stamp is not checked.
Since your question is vague as to exactly how you are acquiring, if the simple fix above does not work, you need to attach your code.
02-13-2013 05:42 AM
Here is my VI. Can you explain mi how can I do the simplest way?
02-13-2013 06:01 AM
2011 format VI please.
02-13-2013 06:08 AM
Here is.I hope that is ok 🙂
02-13-2013 06:16 AM
Hi Dejv,
you're not using a waveform!
You placed a chart in your VI and you converted your array of samples to a cluster of samples.
Use a graph or real waveform(s) to display time-formatted x axis. You can configure DAQmxRead to deliver waveforms...
02-13-2013 06:43 AM
Hi Devj!
Just a quick tip:
If the settings are the same, there is no need to use DAQmx Create Virtual Channel.vi for every single input, you can specify them all at once like so:
All you have to do is to separare your channel names with a comma, and your physical channels are also set apart with either commas or an x:y range.
Best of luck on your project!
Andrew Valko
NI Hungary
02-13-2013 11:22 PM
Hope my attahed VI will help for what you are looking for.
Let me know is it ok or u have any doubt.
Ranjeet
02-14-2013 04:24 AM
To: Ranjeet_Singh
Thank you but still I dont know how to incorporate it into my VI. Could you show me?
02-14-2013 04:44 AM
2011 compatible vi please