From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
There's a CVI driver here and normally you could convert a CVI driver to a LabVIEw one but first someone with would have to create a dll from the source code. You could, however, look at the source code and see what commands are being used to control the instrument and read data from it.
Have you considered using the Instrument I/O Assistant in LabVIEW? If you know the commands or if the vendor can give you some direction, then the Instrument I/O Assistant may be a good way to get you started.