06-18-2009 08:46 AM
Hi am attempting to read a measurment from a Marconi/IFR/Aeroflex 6960B power meter.
I have had a good look in the manual but am unable to see what the GPIB command is to read the display.
Would anyone have a example VI or know the command to do this would be greatly appriciated?
Thanks
C
06-18-2009 09:09 AM
06-25-2009 05:13 AM
Hi Cally,
Have you considered using the Instrument I/O Assistant in LabVIEW? If you know the commands or if the vendor can give you some direction, then the Instrument I/O Assistant may be a good way to get you started.
LINK:
http://zone.ni.com/devzone/cda/tut/p/id/4663
Best regards,
Tony_G