When I use the RS-232 or RS-422

[msgulab240]

Helo sir ,

Me sanaullah gulab 

Regarding the flow meter

Sir , i m using Magmaster electromagnetic flow meter in the water irrigation plant.after servicing this flow meter give reading in Ltr/s . but i need this this reading should come in M^3/h

for this operation i communicate this flow meter with laptop through RS 232 cabel and software putty beta .I attaching some photos for this result which is comming in my laptop  screen.

problem is i am not able to write any command .

So pleas guide me quick

Email -   msgulab240@gmail.com

contect no   +917277274592

[GerdW]

Hi gulab,

why did you hijack an old and unrelated thread?

flow meter give reading in Ltr/s . but i need this this reading should come in M^3/h

Multiply the reading by 3.6 to get values with unit m³/h!

Simple math: 1l/1s = 0.001m³/ (1/3600)h = 3600/1000 m³/h = 3.6 m³/h…

problem is i am not able to write any command .

Read the manual of your device.

Ask the manufacturer support of that device.

i communicate this flow meter  …through RS 232 cabel and software putty beta .

How is your problem related to LabVIEW at all?

[msgulab240]

Helo sir now my Magmaster flow meter problem is solved

[GerdW]

Hi msgulab,

now my Magmaster flow meter problem is solved

Usually you provide the solution so other people with the same problem can learn from it…