Ramping an AC voltage from PCI6052E

[Mizar]

Hi:

I have a PCI6052E board with SCB68 Acc.  I want to send in a AC voltage from 0 to 10 Volts, by ramping it from 0 to 10 Volts.  Also, I need to wait after each output for a fixed time. Does anybody have any experience with this?

Thanks

Mizar.

[AnalogKid2DigitalMan]

Where's Algor?

[Jesse_O]

Hello Mizar,

There are many examples in LabVIEW that demonstrate how to program the PCI-6052E.  If you open NI Example finder and look under Hardware Input & Output >> DAQmx >> Analog Generation >> Voltage, you will find an example called Cont Gen Voltage Wfm-Int Clk.vi.  This VI demonstrates how to generate time varying signals in LabVIEW.

If you are just starting to program in LabVIEW with a data acquisition device you might want to look at this online knowledge base found here.

I hope this help.

Jesse O.
Applications Engineering
National Instruments